Sökning: "UV curing"
Visar resultat 1 - 5 av 15 uppsatser innehållade orden UV curing.
1. Investigation of Antenna Radomes in Low Earth Orbits
Master-uppsats, Lunds universitet/Centrum för analys och syntesSammanfattning : Introduction: This master’s thesis focuses on exploring improved alternative material solutions for antenna radomes used to protect Beyond Gravity Sweden’s satellite antennas in low Earth orbits. Background: As the environment in low Earth orbit is harsh, surface materials on satellites experience high levels of atomic oxygen, ultra violet radiation, thermal-fluctuation, charged particles and micro meteoroids. LÄS MER
2. UV laser patterning of silicone-based soft electrode grids
Master-uppsats, Linköpings universitet/Institutionen för teknik och naturvetenskap; Linköpings universitet/Tekniska fakultetenSammanfattning : Roughly 123 million people worldwide are affected by conditions such as epilepsy, dementia, and cardiovascular diseases. Wearable electrodes are currently used to monitor these conditions short-term. Long-term monitoring would allow for predicting seizures and could be used as a preventive treatment. LÄS MER
3. Biobased Photocurable Resins for 3D-Printing of Self-Healable & Recyclable Thermosets
Kandidat-uppsats, KTH/Fiber- och polymerteknologiSammanfattning : Överkonsumtionen av engångsartiklar i fossilbaserad plast är ett av dagens stora miljöproblem. Således finns en efterfrågan på strategier för framställning av biobaserade plaster i allmänhet och härdplaster i synnerhet. LÄS MER
4. UV Curable Polymers for use in Additively Manufactured Energetic Materials
Master-uppsats, KTH/Fiber- och polymerteknologiSammanfattning : Fast-bränsle-raketer (SRM) har funnit sin plats i en stor mängd tillämpningar sedan deras framkomst mer än 2000 år sedan. En SRMs prestanda är förutbestämd av geometrin av drivmedelskrutet och är begränsad av gjutningsmetoden, som idag främst används i produktion. LÄS MER
5. Short wavelength UV–LED photoinitiated radical polymerization of acrylate–based coating systems—A comparison with conventional UV curing.
Uppsats för yrkesexamina på avancerad nivå, Uppsala universitet/StrukturkemiSammanfattning : The present work was performed at Sherwin–Williams Sweden group AB with the objective of comparing short-wavelength light emitting diodes (UVB/UVC) with the conventional mercury arc lamp as a curing method of acrylate-based, UV-paint undergoing free-radical polymerization when exposed to UV-radiation. Due to environmental and health risks, mercury-doped radiation sources will be phased out in the near future, according to the United Nations Minamata convention, hence new alternatives are needed. LÄS MER