Sökning: "aluminum alloy"
Visar resultat 21 - 25 av 54 uppsatser innehållade orden aluminum alloy.
21. Determining the Influence of the Type of Shielding Gas during Additive Manufacturing of an Aluminum Alloy by Monitoring the Process Qualitatively and Analyzing Process Byproducts Quantitatively
Master-uppsats, KTH/MaterialvetenskapSammanfattning : This thesis analyzes the influence of process gases on the formation and the characteristics of process byproducts that emerge during additive manufacturing of an aluminum alloy belonging to the 2000 series. In order to address the influence, four pure gases, argon, nitrogen, helium, and carbon dioxide, were used as a shielding gas on the same parameter sets. LÄS MER
22. Study of Compound Casting of Aluminum Alloy/Ductile Iron Bimetal : Final Report of Thesis Project, Product Development and Materials Engineering (Master Programme)
Master-uppsats, Jönköping University/JTH, Material och tillverkningSammanfattning : Today’s transportation highly depends on hydrocarbon fuels, and reducing the weight could help a lot in reducing the air pollutants and carbon footprints in the environment to comply with the strict regulations set by reputable standard organizations in the world. Utilizing lightweight materials in automobile parts is one of the key factors to succeed in meeting the goals defined in the standards. LÄS MER
23. Underwater probe for deep sea exploration : Long range acoustic underwater communication system
M1-uppsats, Luleå tekniska universitet/Institutionen för system- och rymdteknikSammanfattning : This was a thesis that was commissioned by Researcher Peter Sigray at the Royal Institute of Technology (KTH) in Stockholm and was based on an idea by Professor Thomas Rossby, University of Rhode Island (URI). The idea was to further develop the existing Expendable Bathythermograph (XBT), which has been in use since the 1960s. LÄS MER
24. Effect of conformal cooling in Additive Manufactured inserts on properties of high pressure die cast aluminum component
Master-uppsats, Jönköping UniversitySammanfattning : Additive manufacturing can bring several advantages in tooling applications especially hot working tooling as high pressure die casting. Printing of conformal cooling channels can lead to improved cooling and faster solidification, which, in turn, can possibly result in better quality of the cast part. LÄS MER
25. Surface Treatment for Additive Manufactured Aluminum Alloys
Master-uppsats, Linköpings universitet/Molekylär ytfysik och nanovetenskap; Linköpings universitet/Tekniska fakultetenSammanfattning : Manufacturing of aircraft parts is often complex and time-consuming, which has led to an increased interest in new manufacturing technologies in the Swedish industry such as additive manufacturing (AM). Additive manufacturing techniques could be a solution to meet the aircrafts’ demand since it contributes to an efficient manufacturing and allows a just-in-time production of complex metal parts in their final shape. LÄS MER