Sökning: "Software Loading"
Visar resultat 1 - 5 av 161 uppsatser innehållade orden Software Loading.
1. Effect of dwell (hold) time on high temperature fatigue crack growth of AM components
Master-uppsats, KTH/Lättkonstruktioner, marina system, flyg- och rymdteknik, rörelsemekanikSammanfattning : GKN Aerospace AB, Sweden (GAS) is one of the leading companies taking up the charge in manufacturing components using Additive Manufacturing(ed) (AM) techniques in the aerospace sector. They are a hub of engineering and they are a supplier of engine and engine components to the world’s leading aero-engine manufacturers, and airframes to civil and military aircraft manufacturers. LÄS MER
2. Thermal Analysis of Tap- Changers
Uppsats för yrkesexamina på avancerad nivå, Uppsala universitet/Tillämpad mekanikSammanfattning : This thesis provides a way of mapping the temperature development of the tap-changer oil for some different standardized loading cases. The project was in collaboration with Hitachi Energy for one of their production cites situated in Ludvika, Sweden. The software used for the simulation environment was COMSOL 6.1 which is a finite element solver. LÄS MER
3. Automation of yarnpick : Evaluating a cobots effectiveness for pick and place operations in a textile industry
Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematikSammanfattning : Repetitive, strenuous and heavy lifting are working conditions many companies have a hard time to eliminate. Such is the case for the textile company, AB Ludvig Svensson. A big part of the production at the factory is unpacking, loading, unloading and just moving lots of rolls of yarn daily. LÄS MER
4. CET Viewer : Visualisering och interaktion med 3D-miljöer på multi-touch skärm
Kandidat-uppsats, Linköpings universitet/Institutionen för datavetenskapSammanfattning : Detta arbete har utforskat möjligheterna att exportera en ritning gjord i programvaran CET Designer och importera den i en iPad-applikation där man kan interagera med modellen i 3D med hjälp av enhetens multi-touchgränssnitt. Exporten gjordes till formaten obj och mtl med hjälp av CET Designers egna programmeringsspråk, CM. LÄS MER
5. Noggrannhetsanalys av 3D-skannern Metrascan 3D Black Elite
Kandidat-uppsats, Karlstads universitet/Institutionen för ingenjörsvetenskap och fysik (from 2013)Sammanfattning : This report has been written to analyze a newly acquired measurement method within the companyAston Harald Mekaniska Verkstad AB, which is a 3D scanner made by the company Creaform. Thismodel bought has the name Metrascan 3D Black Elite. LÄS MER