Sökning: "siemens industrial turbomachinery"
Visar resultat 21 - 25 av 82 uppsatser innehållade orden siemens industrial turbomachinery.
21. Flödesmätning i smörjoljesystem med bärbar ultraljudsmätare : Underlag till en arbetsinstruktion
Uppsats för yrkesexamina på grundnivå, Uppsala universitet/MikrosystemteknikSammanfattning : This thesis was conducted at Siemens Industrial Turbomachinery (SIT) under a period of ten weeks. Siemens service department at this company takes care of the aftermarket of the turbines and provides inspection, spare parts and measures to increase the efficiency of the machines. SIT provides also oil lubrication systems. LÄS MER
22. Method Development for Heat Transfer Predictions in Channel Flows : An efficient CFD approach for ribbed stationary channels
Master-uppsats, Linköpings universitet/Mekanisk värmeteori och strömningsläraSammanfattning : Gas turbines are today used in numerous industrial and aeronautical applications. To increase the specific power output and efficiency, a high turbine inlet gas temperature is desired. The high temperature leads to the need of cooling critical components in the hot gas path. LÄS MER
23. Simulation of Gas Channel Temperatures during Transients for SGT-800
Master-uppsats, Lunds universitet/Institutionen för energivetenskaperSammanfattning : Siemens Industrial Turbomachinery has developed dynamic gas turbine models to compute performance parameters such as temperature, pressure, mass flow and power during transients. Results from the current dynamic model correspond to measured data except for gas channel temperatures that change too fast during transients. LÄS MER
24. Numerical investigation of a transonic nozzle guide vane under elevated loading
Master-uppsats, KTH/EnergiteknikSammanfattning : Despite many new investigations over the last years, there is no indication that alternative energy conversion technologies will overtake the place of turbomachinery. Hence thermal turbines are still the most dominant movers for electricity generation. LÄS MER
25. A CFD study of the losses in sharp and radiused orifices with and without inlet cross-flow
Master-uppsats, KTH/MekanikSammanfattning : Increasing efficiency demands on modern gas turbines require higher operating temperatures which increase the thermal load on the materials. The secondary air system transfers heat away from the components to ensure that the operating conditions are under the components’ critical values. LÄS MER