Sökning: "Conventional sintering"
Visar resultat 1 - 5 av 12 uppsatser innehållade orden Conventional sintering.
1. Böjhållfastheten hos flerskiktade zirkoniamaterial beroende på sintringsprogram
Kandidat-uppsats, Malmö universitet/Odontologiska fakulteten (OD)Sammanfattning : Aim: The aim of the present study was to evaluate how the material KATANA ™ Zirconia YML is affected in strength depending on two different sintering programs. The evaluation of the strength was made by means of a biaxial flexural strength test. LÄS MER
2. Innovation genom additiv tillverkning
Kandidat-uppsats, KTH/Maskinkonstruktion (Inst.)Sammanfattning : Additiv tillverkning, AM, är en teknik som utvecklas med stormsteg. Konventionella tillverkningsmetoder, som exempelvis svarvning eller formgjutning, är begränsade när det kommer till att ta fram produkter med komplexa geometrier och därför är AM ett bra komplement. LÄS MER
3. Design of cemented carbide with Ni-based superalloy binder strengthened with y’-Ni3Al precipitates
Master-uppsats, KTH/MaterialvetenskapSammanfattning : Replacement of cobalt in cemented carbides has gained in attention recently because threats of regulations due to health issues (cancerogenic effect), increased demand from the electric vehicle industry and the questionable extraction from countries like Democratic Republic of Congo. In this report the use of Ni-based binder as an alternative binder for cemented carbides has been explored. LÄS MER
4. Point source carbon capture by porous inorganic carbonates
Uppsats för yrkesexamina på avancerad nivå, Uppsala universitet/Nanoteknologi och funktionella materialSammanfattning : Mesoporous inorganic carbonates (MIC) was synthesized and tested as adsorbents for CO2, using vacuum and temperature swing adsorption. Mesoporous magnesium carbonate (MMC), mesoporous calcium carbonate (MCC) and mesoporous calcium magnesium carbonate (MCMC), all included in MIC, are exceedingly porous with an amorphous structure. LÄS MER
5. Additive Manufacturing of Silicon Nitride
Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/MaterialvetenskapSammanfattning : This study aims to investigate the fabrication of silicon nitride ceramics via additive manufacturing method. Silicon nitride exhibits excellent thermo-mechanical properties and it is one of the main structural ceramics. The excellent properties of silicon nitride are obtained through densification via liquid phase sintering. LÄS MER