Sökning: "Flow rate"
Visar resultat 21 - 25 av 918 uppsatser innehållade orden Flow rate.
21. Finding ways of optimizing coagulant dosage, for a more sustainable wastewater treatment process
Master-uppsats, Lunds universitet/Kemiteknik (CI)Sammanfattning : The wastewater treatment process at Oatly consists of several treatment steps of which, two are chemical treatment steps involving coagulation followed by flotation to remove phosphorous and COD. The coagulant dosage is mainly determined based on the operator’s experience and supported using results from jar tests. LÄS MER
22. Conceptualisation, Implementation and Commissioning of a Controlled Pyrolysis Rig : KTH Master Thesis Report
Master-uppsats, KTH/Skolan för industriell teknik och management (ITM)Sammanfattning : Liquid methane has seen popular interest from industry and academia as a next-generation rocket fuel due to its favorable performance characteristics and potential for extra-terrestrial in-situ resource utilisation. Since the rocket combustion chamber and nozzle are subject to high heat loads, regenerative cooling is a standard method to achieve lower temperatures. LÄS MER
23. Evaluation of The Impact of Automated Driven Vehicles on Traffic Performance at Four-leg Signalized Intersections
Master-uppsats, Linköpings universitet/Kommunikations- och transportsystem; Linköpings universitet/Tekniska fakultetenSammanfattning : Intersections, particularly four-leg signalized intersections, are frequent sites of traffic congestion in urban areas. This congestion can lead to delays, increased travel time, and a negative impact on traffic performance and quality of life for people. LÄS MER
24. Control Aid Implementation -Modelling and simulation of triple extruder-
Master-uppsats, Lunds universitet/Kemiteknik (CI)Sammanfattning : In the production of their High Voltage Direct Current Cables (HVDC) and High Voltage Alternating Current Cables (HVAC), NKT uses triple extruders to create layers of insulation and semi-conduction. A model to predict the effect of extruder inputs on the cable’s insulation and semi-conducting layers has been created and trained to predict the extruder in discrete time. LÄS MER
25. Study of mixing and exchange in a drinking water reservoir using CFD modeling
Master-uppsats, KTH/Skolan för teknikvetenskap (SCI)Sammanfattning : This thesis examines water mixing and exchange in a drinking water reservoir operated by themunicipal association Norrvatten. Recent water samples from the reservoir’s outgoing waterhave shown an increase in culturable bacteria during late summer and fall. LÄS MER