Sökning: "On-line monitoring"
Visar resultat 1 - 5 av 26 uppsatser innehållade orden On-line monitoring.
1. Developing an Automated System for Yeast Culture Cultivation and Control using Flow Cytometry
Master-uppsats, Lunds universitet/Teknisk mikrobiologiSammanfattning : Flow cytometry is a versatile tool for monitoring a microbial population at a single-cell level. Multiple parameters can be monitored based on the users’ requirements through the utilization of different dyes, biosensors etc. LÄS MER
2. High-loaded thermophilic anaerobic digestion of mixed sewage sludge : A pilot study
Master-uppsats, Karlstads universitet/Fakulteten för hälsa, natur- och teknikvetenskap (from 2013)Sammanfattning : Municipal wastewater treatment plants (WWTP) are important infrastructural components in a society and also important for sustainability. In a WWTP the most common treatment configuration is mechanical, biological, and chemical treatment of the wastewater. LÄS MER
3. Diffuse dust at Boliden Bergsöe investigated through X-ray Fluorescence Spectroscopy
Master-uppsats, Lunds universitet/Ergonomi och aerosolteknologiSammanfattning : Boliden Bergsöe operates a secondary lead smelter for recycling of lead-acid batteries, located in the industrial area of Landskrona. Measurements to monitor levels of airborne particles have been conducted in several locations in Landskrona since 1977. LÄS MER
4. Studie över klimatförändringars påverkan på dynamisk ledningskapacitet
Uppsats för yrkesexamina på avancerad nivå, Uppsala universitet/ElektricitetsläraSammanfattning : The thesis aims to examine the impact of climate change on line rating and to investigate the possibility of a potential increase of capacity of an overhead line. The line rating of an overhead line determines how much current can be transmitted in the line. LÄS MER
5. Relating Process Data to Product Quality in Transmission Manufacturing
Master-uppsats, KTH/Industriell produktionSammanfattning : Research has shown that vibration produced by a machine tool provides useful information for the maintenance of its structural parts. Thus, the vibration signal should also give information about tool wear and, consequently, surface roughness of the machined workpieces. LÄS MER