Sökning: "mechanical wear"

Visar resultat 1 - 5 av 154 uppsatser innehållade orden mechanical wear.

1. 1. Effect of temperature on early stage adhesion during TiAlN sliding against Inconel 718 and Stainless steel 316L : High temperature tribology

   Master-uppsats, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

   Författare :Ahsan Ali; [2023]
   Nyckelord :High temperature tribology; Early-stage adhesion; Adhesive wear; Friction; Wear resistant coatings; Physical vapour deposition PVD coatings; TiAlN; Tungsten carbide WC Co ; Difficult to machine super alloys; Inconel 718; Stainless steel 316L; High-performance materials; Abrasion; Oxidation; Chipping; Ploughing; Characterization;

   Sammanfattning : High-performance materials such as stainless steels and nickel based super alloys are widely used in demanding applications where high mechanical and thermal properties are required. The applications of super alloys are mainly found in jet engines, power plants and gas turbines demanding high fatigue strength, corrosion and oxidation resistance as well as wear resistant properties. LÄS MER

3. 2. Utveckling och utvärdering av en funktionssäker pulsgivare : Konkretisering och vidareutveckling av en patenterad lösning vilken ämnas detektera låsta lager

   Master-uppsats, Mälardalens universitet/Akademin för innovation, design och teknik

   Författare :Kim Bojnell; [2023]
   Nyckelord :Pulsgivare; Mekanisk konstruktion; Driftsäkerhet; Funktionssäkerhet; Tillståndsövervakning; Feleffektanalys; Underhåll; Produktutveckling;

   Sammanfattning : An emerging industrial automation has led to higher demands required for construction of encoders to ensure functionality of automated processes. The main purpose of the encoder is to provide data which indicates the condition of a drive system. LÄS MER

4. 3. Böjhållfasthet hos PMMA beroende på framställningsmetod, material och slitage efter termocykling. : -

   M1-uppsats, Malmö universitet/Odontologiska fakulteten (OD)

   Författare :Nemany Khadije; Abdallah Mohammed Awad; [2023]
   Nyckelord :Bettskenor; Böjhållfasthet; Fräsning; PMMA; TMD;

   Sammanfattning : Aim: The purpose of the study is to investigate the flexural strength of polymers (PMMA) intended for stabilization splints produced by heat-activated polymerization or milling, as well as how the flexural strength is affected wear.   Material and Methods: Twelve rectangular specimens in the dimensions 64 x 10 x 3 mm were produced by milling and divided into two groups: F (milled) and FS (milled subjected to wear testing). LÄS MER

5. 4. Vibroacoustic Analysis of an OLTC Diverter Switch for Condition Monitoring : Time frequency analysis with Fourier and wavelet transform in combination with multivariate logistic regression for condition monitoring of OLTC diverter switch

   Uppsats för yrkesexamina på avancerad nivå, Uppsala universitet/Avdelningen för systemteknik

   Författare :Simon Persson; [2023]
   Nyckelord :Wavelet transform; CWT; logistic regression; machine learning; ML; vibroacoustic analysis; time frequency analysis; tap changer; diverter switch; power transformer; classification; prediction; condition; vibrations; state prediction; Hitachi Energy;

   Sammanfattning : Vibrations are everywhere around us all the time and we often recognise them as sounds that we can hear and analyse with our brain. In this thesis, data that has been gathered from a diverter switch (DS) in a controlled environment, is analysed. LÄS MER

7. 5. Microstructure and Mechanical Investigation ofCarbides Particles Reinforced High AusteniticManganese Steel

   Master-uppsats, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

   Författare :Abderrahim Ait ouakrim; [2023]
   Nyckelord :Metal Matrix Composites MMCs ; Manganese steel; Carbides particles; Wear resistance;

   Sammanfattning : The objective of this study was to produce a metal matrix composite (MMC). This compositematerial proves highly suitable for scenarios involving abrasive wear, owing to the exceptionalhardness of carbide particles, in conjunction with the remarkable ductility and capacity for workhardening found in Hadfield steel. LÄS MER