Sökning: "multiphase flow"
Visar resultat 26 - 30 av 34 uppsatser innehållade orden multiphase flow.
26. On Flow Predictions in Fuel Filler Pipe Design - Physical Testing vs Computational Fluid Dynamics
Master-uppsats, Linköpings universitet/Mekanisk värmeteori och strömningslära; Linköpings universitet/Tekniska högskolanSammanfattning : The development of a fuel filler pipe is based solely on experience and physical experiment. The challenge lies in designing the pipe to fulfill the customer needs. In other words designing the pipe such as the fuel flow does not splash back on the fuel dispenser causing a premature shut off. LÄS MER
27. Jet flow simulations of Baihetan hydropower station’s discharge surface spillways
Uppsats för yrkesexamina på avancerad nivå, Umeå universitet/Institutionen för tillämpad fysik och elektronikSammanfattning : This project was performed in order to determine if numerical simulations can be used to predict the spreading of a water jet that exits the discharge surface spillways of Baihetan hydropower station. If the spreading ranges can be predicted correctly using numerical simulations, the pressure distribution in the plunge pool downstream the dam can be determined. LÄS MER
28. Oil Cooling of Electric Motor using CFD
Master-uppsats, KTH/Tillämpad termodynamik och kylteknikSammanfattning : This thesis investigated the heat transfer of internally oil cooled rotors in permanent magnet electric machines which are, among other things, used in hybrid vehicles or zero emission vehicles. The magnets become sensitive and can be demagnetized at high working temperatures, hence the need of cooling. LÄS MER
29. Level Set Methods for Two-Phase Flows with FEM
Master-uppsats, Uppsala universitet/Institutionen för informationsteknologiSammanfattning : Two-phase flows is a branch of multiphase flows. The aim of the project is to implement two different level set methods and analyse and compare the numerical results. The level set method is used in order to represent the behaviour of the interface between two incompressible fluids in a flow. LÄS MER
30. Wall Condensation Modelling in Convective Flow
Master-uppsats, KTH/Kraft- och värmeteknologiSammanfattning : Modelling condensation of water vapour is important in a number of engineering applications, such as nuclear reactor containment, rocket engine nozzles and heat exchangers. The current study investigates the possibilities of modelling condensation induced by a cold surface in a flow at high velocity and temperature. LÄS MER