Sökning: "steel corrosion"
Visar resultat 16 - 20 av 127 uppsatser innehållade orden steel corrosion.
16. Fogkoncept för aluminium & galvaniserat stål : Anpassat för elektrifierat semesterfordon
Kandidat-uppsats, Jönköping University/JTH, Konstruktion och produktutvecklingSammanfattning : Nufotec is a company that works with mechanical design and product development. The company has worked with a Tranås based company called Inzile in the past. Inzile has built small electrified trucks in the past but are now going to start development of electrified resort vehicles. LÄS MER
17. Effekter av livsmedelsförädling för lokalkorrosion på rostfritt stål 316L
Master-uppsats, Lunds universitet/Industriell ProduktionSammanfattning : Pitting corrosion on 316L stainless steel has been widely studied, but knowledge is lacking within food processing environments. A new test setup was developed to enable electrochemical measurements inside a heat exchanger (pasteurizer) where solutions can be heated and cooled rapidly, allowing for corrosion tests of solutions that do not withstand high temperatures for a long period of time. LÄS MER
18. Structural strengthening and sustainability improvements of existing buildings – A case study
Master-uppsats, Linnéuniversitetet/Institutionen för byggteknik (BY)Sammanfattning : In Sweden, a large share of residential buildings was built more than 50 years ago. Consequently, old materials, poor maintenance, and corrosion can affect the structural performance of these buildings. Additionally, these buildings do not meet the latest energy efficiency and Eurocode regulations. LÄS MER
19. Fatigue and microstructural study of a 316L austenitic stainless steel marine component produced by Wire Arc Additive Manufacturing (WAAM)
Uppsats för yrkesexamina på avancerad nivå, Uppsala universitet/Tillämpad materialvetenskapSammanfattning : In this study, the fatigue- and fracture properties and microstructure of a marine component of austenitic stainless steel 316L manufactured with the novel method Wire Arc Additive Manufacturing were investigated and compared with data from literature. The purpose was to find a critical flaw size in the material related to its fatigue life. LÄS MER
20. Konstruktion av nya nödskorstenslock
Uppsats för yrkesexamina på grundnivå, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematikSammanfattning : This is a thesis for bachelor’s degree in mechanical engineering at Luleå tekniska universitet. Containing a redesign of existing emergency chimney caps places on the radiation chamber, which is part of the exhaust gas cleaning process after electronic scrap combustion in the E-kaldo plant at Boliden Rönnskär in Skelleftehamn. LÄS MER