Sökning: "desulphurisation"
Visar resultat 1 - 5 av 6 uppsatser innehållade ordet desulphurisation.
1. Desulphurisation of cement flue gases
Uppsats för yrkesexamina på grundnivå, KTH/Skolan för kemi, bioteknologi och hälsa (CBH)Sammanfattning : Flue gas desulphurisation (FGD) is a crucial method to minimise the SO2 emissions from industrial processes. The FGD system utilise an alkaline sorbent to remove SO2 from the flue gases. Calcium in form of limestone is a commonly used sorbent where gypsum is produced asa by-product. LÄS MER
2. What If We Tilt the AOD? : Developing a numerical and physical model of a downscaled AOD converter to investigate flow behaviour when applying an inclination.
Master-uppsats, KTH/MaterialvetenskapSammanfattning : In a scrap based stainless steel plant the dominant process for carbon reduction is the Argon oxygen decarburisation process (AOD). The process goes through three steps: decarburisation, reduction and desulphurisation where the main challenge is to oxidise carbon to CO without oxidising the expensive chromium. LÄS MER
3. Characterisation of Used Lead-Acid Batteries for Feed Optimisation in Secondary Lead Production
Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för samhällsbyggnad och naturresurserSammanfattning : Used lead-acid batteries are the main raw material in secondary lead production. Technologicalprogress in the car industry, have raised concerns regarding the lead-acid battery’s leading positionas electrochemical storage system in the future. LÄS MER
4. Implementering av multivariabel reglering i DCS-miljö
Uppsats för yrkesexamina på avancerad nivå, Institutionen för systemteknikSammanfattning : Inom processindustrin finns en etablerad reglerhierarki där basreglering sker med PID-regulatorer och där avancerad, multivariabel styrning sköts av MPC-programvara. Steget mellan dessa två nivåer kan upplevas som stort. För mindre och snabba multivariabla processer undvikes helst en multivariabel ansats, med försämrad reglering som följd. LÄS MER
5. Minimizing the sulphur content in Kraft lignin
Magister-uppsats, Akademin för hållbar samhälls- och teknikutvecklingSammanfattning : The aim of this project is to investigate the possibilities of minimizing the sulphur content in Kraft lignin. Kraft lignin contains about 1.5 to 3% sulphur. The sulphur is believed to be present in lignin as inorganic sulphur, as elemental sulphur, as adsorbed polysulphide and/or as organically bound sulphur. LÄS MER