Sökning: "Direct finite element simulation"
Visar resultat 1 - 5 av 13 uppsatser innehållade orden Direct finite element simulation.
1. Finite Element Modeling of Installation Effects of Soil-Cement Columns
Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för samhällsbyggnad och naturresurserSammanfattning : Since the 1970's deep mixing columns have been widely used all over the world to improve the performance of soft soil in regard to bearing capacity or deformation behaviour. They are installed by mixing a binding agent, e.g. cement, in situ with the soil. LÄS MER
2. Influence of Foundation Modelling on the Seismic Response of a Concrete Dam
Master-uppsats, KTH/BetongbyggnadSammanfattning : It is of great importance to ensure the structural safety of dams during earthquakes since a failure may cause catastrophic consequences. Conventional computation of the structural response of dams is based on a simplified approach where the foundation is considered as massless. LÄS MER
3. Time-Resolved Adaptive Finite Element Simulations for Building Aerodynamics : A proof of concept on minimal computational resources
Master-uppsats, KTH/Skolan för elektroteknik och datavetenskap (EECS)Sammanfattning : The effect of building geometry on the wind environment of cities is such that it can cause problems like wind danger, discomfort and poor ventilation of airborne pollutants. Computational fluid dynamics (CFD) can play a role in assessing changes in wind environment caused by building projects before realisation at little cost. LÄS MER
4. Extraction of tool reaction forces using LS-DYNA and its use in Autoform sheet metal forming simulation
Uppsats för yrkesexamina på avancerad nivå, Blekinge Tekniska Högskola/Institutionen för maskinteknikSammanfattning : In product development there is still potential to decrease lead times with faster and more accurate simulations. The objective of this thesis was to study whether Finite Element (FE) simulations using explicit LS-DYNA to extract reaction forces from sheet metal forming tools during forming, could be used to improve existing FE models in sheet metal forming software AutoForm. LÄS MER
5. Finite element modelling of strained nanowire heterostructures
Kandidat-uppsats, Lunds universitet/Synkrotronljusfysik; Lunds universitet/Fysiska institutionenSammanfattning : When two materials with different lattice constants are grown together, this generates stress between them, and therefore strain. This strain causes them to have different thermal and electrical properties, and this is especially important on the nanoscale where changes have large impacts. LÄS MER