Sökning: "Windsor"

Hittade 5 uppsatser innehållade ordet Windsor.

  1. 1. Estimation of the characteristic in-situ compressive strength class of concrete structures - A case study of the Skuru bridge

    Master-uppsats, KTH/Bro- och stålbyggnad

    Författare :Sara Ahmadiyan; Daniel Mehari; [2021]
    Nyckelord :existing; structures; characteristic; in-situ; compressive; non-destructive; semi-destructive; destructive; cores; EN13791; GCSC; TDOK; UPV; Rebound; Pull-out; Windsor; correlation; calibrate; indirect; direct; estimate; befintlig; konstruktion; karakteristisk; tryckhållfasthet; icke-destruktiv; halv-destruktiv; destruktiv; kärnor; EN13791; GCSC; TDOK; UPV; Rebound; Utdragskraft; Windsor; korrelation; kalibrera; indirekt; direkt; bedöma;

    Sammanfattning : It is inevitable that Structures become older and their intended use changes or the structuralcodes regulations change. In some regions the damage from seismic activities is a possibility.It becomes, therefore crucial to assess the structural capacity of such structures. LÄS MER

  3. 2. Numerical study of the effects of wind-tunnel conditions on a passenger vehicle in crosswinds

    Master-uppsats, KTH/Teknisk mekanik

    Författare :Sahil Gupta; Vivek J Shah; [2020]
    Nyckelord :;

    Sammanfattning : Wind tunnel tests is a necessity when it comes to study of aerodynamic flow field around vehicle in its development process. However, there are certain limitations on physical wind tunnel tests during vehicle development process. This includes high running costs and interference effects due to blockage and boundary conditions. LÄS MER

  4. 3. Från träd till färdig möbel : Vilka fördelar samt begränsningar finns det med att utgå ifrån färskt virke vid möbelsnickeri. Samt en processbeskrivning av tillverkningen av sekretären ”cessabit”

    M1-uppsats, Mittuniversitetet/Institutionen för design

    Författare :Björn Olsson; [2019]
    Nyckelord :Möbelsnickeri; Sekretär; Virkestorkning; Färskträ; Färskträsnickring; Windsor; Sälg;

    Sammanfattning : Denna rapport skrivs dels i syfte av att ge en processbeskrivning av tillverkningen av en sekretär, där de flesta momenten finns dokumenterade med bilder och beskrivande text. Ett annat syfte med rapporten är att dokumentera och analysera processen om hur det färska virket som skulle användas till projektet hanterades. LÄS MER

  5. 4. Techno-economic evaluation of a floating PV system for a wastewater treatment facility

    Master-uppsats, KTH/Energiteknik

    Författare :Bruno Paixão Martins; [2019]
    Nyckelord :;

    Sammanfattning : An increasing capacity of floating photovoltaic technology (FPV) has been deployed in the past five years, showing an alternative to countries with small surface areas to take advantage of man-made water bodies to install solar power. Furthermore, regions where land area is primarily geared towards other uses such as agriculture or are located in large urban centers are also a target for these installations, as land costs tend to be a relevant share of the investment on a solar energy project. LÄS MER

  7. 5. Detached-Eddy Simulations of Active Flow Control Systems on a Simplified Car Geometry

    Master-uppsats, KTH/Aerodynamik

    Författare :Andreas Persson; [2012]
    Nyckelord :;

    Sammanfattning : The feasibility of implementing an active flow control system in ground vehicles is investigated through detached-eddy simulations of the Windsor model. This is done in the open-source CFD code OpenFOAM. LÄS MER